Synology RackStation RS1626xs+

RS1626xs+

High-performance scalable storage for enterprise workloads

• Redundant power supplies ensure maximum server uptime by preventing single-point power failures.
• Maximize service continuity by pairing two identical units into a Synology High Availability cluster, ensuring automated, minute-level failover in the event of hardware failure.
• Built-in 2x 10GbE ports can be bonded with Link Aggregation to enable automatic network failover and load balancing.

Technical Specification

Data Sheet

Inquire Now

CPU	CPU Model	Intel Xeon D-1726
	CPU Quantity	1
	CPU Cores	6
	CPU Threads	12
	CPU Architecture	64-bit
	CPU Frequency	2.9 (base) / 3.5 (turbo) GHz
	Hardware Encryption Engine
Memory	System Memory	16 GB DDR4 ECC RDIMM
	Memory Module Pre-installed	16 GB (16 GB × 1)
	Total Memory Slots	4
	Maximum Memory Capacity	64 GB (16 GB x 4)
	Notes	Synology may revise pre-installed memory module specifications in response to component lifecycle and supply conditions. All revised components undergo the same rigorous validation to ensure equivalent compatibility, stability, and performance. Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion. For multi-module memory configurations, all modules must be identical and share the same model number. Check the Product Manual of your Synology product for recommended memory configurations.
Storage	Drive Bays	4
	Maximum Drive Bays with Expansion Unit	16 (RX1225RP × 1)
	M.2 Drive Slots	2 (NVMe)
	Drive Type (See all supported drives)	3.5" SATA HDD 2.5" SATA SSD M.2 2280 NVMe SSD
	Hot Swappable Drive*
	Notes	The hot swappable drive feature is not supported by M.2 SSD slots. Compatible drives are mandatory. Please consult our compatibility list before purchasing hard drives. For more details, please refer to this article.
External Ports	RJ-45 10GbE LAN Port	2
	Out-of-Band Management LAN Port	1
	USB 3.2 Gen 1 Port	2
	Expansion Port	1
	Expansion Port Type	Mini-SAS HD
PCIe	PCIe Expansion	1 x Gen4 x8 slot (x8 link)
Appearance	Form Factor (RU)	1U
	Size (Height x Width x Depth)	44 mm × 481.9 mm × 668.5 mm
	Weight	9.5 kg
	Rack Installation Support*	4-post 19" rack (Synology Rail Kit - RKS-04)
	Notes	The rail kit is sold separately
Others	System Fan	40 mm × 40 mm × 4 pcs
	Fan Speed Mode	Full-Speed Mode Cool Mode Quiet Mode
	Easy Replacement System Fan
	Power Recovery
	Noise Level*	52.6 dB(A)
	Scheduled Power On / Off
	Wake on LAN / WAN
	Power Supply Unit / Adapter	250 watts
	Redundant Power Supply
	AC Input Power Voltage	100V to 240V AC
	Power Frequency	50/60 Hz, Single Phase
	Power Consumption	97.59 watts (Access) 56.19 watts (HDD Hibernation)
	British Thermal Unit	332.78 BTU/hr (Access) 191.61 BTU/hr (HDD Hibernation)
	Notes	For more information on how power consumption is measured, refer to this article. Noise testing was conducted with the Synology system fully installed with Synology SATA SSDs and in an idle state. Two G.R.A.S. type 40AE microphones were placed at a 1 m distance from the front and rear of the device. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%.
Temperature	Operating Temperature	5°C to 35°C (32°F to 95°F)
	Storage Temperature	-20°C to 60°C (-5°F to 140°F)
	Operating Humidity	8% to 80% RH
	Storage Humidity	5% to 95% RH

Download Data Sheet

Product Inquiry

CAPTCHA

This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.